Get free quotes

Free tool

Prefab home cost calculator

Choose the kind of building, enter the floor size and the finish, and see a low to high budget in rand, with a slab if you need one. The ranges come from published South African prices.

A partly built prefab home with fibre cement wall panels and an open timber roof frame on a concrete slab
Prefab Home Cost CalculatorTL-01
Inputs
Building type, size, finish
Gives
Low and high budget in rand
Adds
A concrete slab if needed
Prices
Published SA ranges, Nov 2026
Not included
Plans, fees, transport, crane
Take-off sheetPrefab Home Cost Calculator
Sheet
TL-01
Units
m · R
Scale
NTS
Cost
Free

1What are you building?

2How big?

3Finish and base

Budget range, low to high

Floor area
 
Rate for this building
 
Building, low to high
 
Slab
 
Your finish, about
 
Range with slab
 

The first question most people ask is what a prefab home costs. Suppliers price by the square metre of floor, and the rate depends far more on what the building is than on the brand: a plain timber wendy shell costs a fraction of a finished container conversion of the same size. This calculator multiplies your floor area by the published South African range for each kind of building and lets you place your finish at the low, middle or top of that range.

Where the rates come from

Each rate is a range seen in South African supplier price lists, listings and cost guides in November 2026, converted to rand per square metre of floor where the source gave a total. They are the same ranges used on the topic pages:

BuildingRange per m²What it usually covers
Wendy houseR1,000 to R1,800Frame, cladding, roof, door and window; lining, wiring and plumbing extra
Wooden cabin shellR900 to R1,800A basic timber shell before lining, services and base
Nutec houseR3,000 to R6,000Basic fibre cement house up to one with ceilings, kitchen, bathroom and geyser
Prefabricated homeR3,000 to R11,000A finished home with kitchen, bathroom, plumbing and electrics
Container homeR7,000 to R11,000A converted, finished container; transport and crane extra
Park homeR7,800 to R8,700A near finished unit, excluding VAT and transport
Granny flatR6,500 to R15,000A second dwelling, all building methods
Light steel frame houseR8,000 to R15,000A finished LSF home

The slab uses R600 to R950 per m², the range for a plain concrete floor with labour. Several figures come from single listings or search snippets, so treat the result as a first budget, not a price.

What the estimate leaves out

  • Plans and council fees: a dwelling needs approved plans. See prefab house plans and the plans checker.
  • Delivery and the crane: often a separate line, priced on distance and access. See delivery and installation.
  • Connections: the water, sewer or septic tank and the electrical supply to the stand, and the certificates of compliance.
  • NHBRC enrolment for a new home built by a home builder, and VAT where a price is quoted without it.
  • Site work: clearing, levelling a slope, retaining and access for the truck.

Getting from a budget to a price

Once the budget fits, send the size, the rooms and the finish to two or three suppliers and ask each to quote the same thing in writing: the frame, the cladding and its thickness, the insulation, the roof, the windows, what is inside and what is excluded. Use the floor area calculator if you are not sure of the size, and the slab calculator for the base.

Frequently asked questions

How much does a prefab home cost per square metre in South Africa?
Published ranges run from about R1,000 to R1,800 per m² for a plain wendy shell, R3,000 to R6,000 for a nutec house, R3,000 to R11,000 for a finished prefab home and R7,000 to R11,000 for a converted container. The finish, the size and the extras move it most.
Is a prefab home cheaper than a brick house?
Often, for the same floor size and a simple finish, mainly because it goes up faster with less labour on site. A high end prefab or a light steel frame home can cost as much as a conventional build. Compare written quotes for the same plan and finish.
What does a 6 x 6 m nutec house cost?
A 6 x 6 m house is 36 m². At the published R3,000 to R6,000 per m², that is about R108,000 to R216,000 for the building, before the slab, delivery, plans and connections.
Why is my supplier's price higher than the calculator?
The calculator gives the building only, from published ranges. Quotes often include delivery, the crane, a slab or stilts, VAT, plumbing and electrical work and a finish above basic. Ask for each item on its own line so you can compare.

Free quote request

Send your figures for free quotes

Fill in the build sheet the way you would explain the job in the yard: what it is for, the size on the ground, the rooms, how it gets to site and how to reach you. Suppliers and builders who work in your area quote you directly.

Build sheetFree, no obligation
Sheet
8861
Topic
HM-01
Mark
Off-site
Date
22.11.2026

1The job

2Size the floor plan (optional, it helps the quote)

Plan from above

Floor area
-
Verandah
-
Wall run
-
Estimate
-

A rule of thumb from published prices, not a quote.

3Delivery and when

4Parts list (optional)

  1. 01
  2. 02
Up to 12 lines: units, rooms, boards, a slab, delivery or work.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable suppliers and builders. See our privacy policy.

Get free prefab quotes